Alt!
Serversystem auf FSC P-5625
Der neue alte!
Fujitsu Primergy TX300 S4
| Hersteller | Fujitsu |
| Modell | Primergy TX300 S4 |
| Server-Typ | Rack |
| CPU | 2x Intel XEON E5405 2×6 MB 2.00 GHz |
| Anzahl Kerne pro CPU | Quad-Core (4 Kerne) |
| Arbeitsspeicher (GB) | 8 GB DDR3 RAM (4x 2 GB) |
| Festplatten | 2x 146 GB SAS 3,5″ 15k 3G HDD |
| Laufwerk | CD / DVD |
| Controller | PCI RAID CARD LSI1078 256MB |
| Netzteil | 2x PSU HotPlug 700W: S26113-E525-V50 |
Zusätzlich noch 4 x SATA-Platten mit 1x1TB, 2x250GB, 1x160GB alle als Single an Raid0 und eine 1x160GB externe USB Platte aus meinem alten System.
Gesichert wurde das alte System mit „Redo Backup and Recovery“ und anschließend auf der „Primergy TX300 S4“ wieder hergestellt. Die übrigen Festplatten wurden mit „tar“ kopiert. Anschließend noch ein Upgrade auf die neueste CentOS 7 Version.
Mountpoints anlegen:
mkdir /OLD mkdir /NEW
Alte und neue Platte mounten:
mount /dev/hda5 /OLD mount /dev/sda1 /NEW
Zur alten Platte wechseln:
cd /OLD
Inhalt mit allen Links und Rechten kopieren:
tar -cSp --numeric-owner --atime-preserve -f - . | ( cd /NEW && tar -xSpv --atime-preserve -f - )
Weitere Infos mit storcli, ipmi-sensors, megacli und ipmitool
[root@lx-server ~]# storcli /c0 /eall /sall show Controller = 0 Status = Success Description = Show Drive Information Succeeded. Drive Information : ================= ------------------------------------------------------------------------------------- EID:Slt DID State DG Size Intf Med SED PI SeSz Model Sp Type ------------------------------------------------------------------------------------- 252:0 11 Onln 0 136.218 GB SAS HDD N N 512B MBA3147RC U - 252:1 12 Onln 1 136.218 GB SAS HDD N N 512B MBA3147RC U - 252:2 15 Onln 3 232.375 GB SATA HDD N N 512B Hitachi HDP725025GLA380 U - 252:3 16 Onln 4 232.375 GB SATA HDD N N 512B Hitachi HDP725025GLA380 U - 252:4 18 Onln 5 148.531 GB SATA HDD N N 512B Hitachi HDT721016SLA380 U - 252:5 17 Onln 2 931.0 GB SATA HDD N N 512B ST1000VX000-1ES162 U - ------------------------------------------------------------------------------------- EID-Enclosure Device ID|Slt-Slot No.|DID-Device ID|DG-DriveGroup DHS-Dedicated Hot Spare|UGood-Unconfigured Good|GHS-Global Hotspare UBad-Unconfigured Bad|Onln-Online|Offln-Offline|Intf-Interface Med-Media Type|SED-Self Encryptive Drive|PI-Protection Info SeSz-Sector Size|Sp-Spun|U-Up|D-Down|T-Transition|F-Foreign UGUnsp-Unsupported|UGShld-UnConfigured shielded|HSPShld-Hotspare shielded CFShld-Configured shielded|Cpybck-CopyBack|CBShld-Copyback Shielded
[root@lx-server ~]# storcli /c0 /bbu show Controller = 0 Status = Success Description = None BBU_Info : ======== ---------------------------------------------------------------------- Model State RetentionTime Temp Mode MfgDate Next Learn ---------------------------------------------------------------------- iBBU Optimal 0 hour(s) 20C - 2008/09/23 2017/13/08 00:33:59 ----------------------------------------------------------------------
[root@lx-server ~]# ipmi-sensors ID | Name | Type | Reading | Units | Event 32 | Ambient | Temperature | 32.25 | C | 'OK' 96 | Systemboard | Temperature | 37.00 | C | 'OK' 160 | CPU 1 | Temperature | 32.00 | C | 'OK' 224 | CPU 2 | Temperature | 32.00 | C | 'OK' 288 | DIMM-1A | Temperature | 62.00 | C | 'OK' 352 | DIMM-1B | Temperature | 58.00 | C | 'OK' 416 | DIMM-2A | Temperature | N/A | C | N/A 480 | DIMM-2B | Temperature | N/A | C | N/A 544 | DIMM-3A | Temperature | N/A | C | N/A 608 | DIMM-3B | Temperature | N/A | C | N/A 672 | DIMM-4A | Temperature | N/A | C | N/A 736 | DIMM-4B | Temperature | N/A | C | N/A 800 | DIMM-1C | Temperature | 64.00 | C | 'OK' 864 | DIMM-1D | Temperature | 66.00 | C | 'OK' 928 | DIMM-2C | Temperature | N/A | C | N/A 992 | DIMM-2D | Temperature | N/A | C | N/A 1056 | DIMM-3C | Temperature | N/A | C | N/A 1120 | DIMM-3D | Temperature | N/A | C | N/A 1184 | DIMM-4C | Temperature | N/A | C | N/A 1248 | DIMM-4D | Temperature | N/A | C | N/A 1312 | Main +12V | Voltage | 12.00 | V | 'OK' 1376 | Main -12V | Voltage | -12.11 | V | 'OK' 1440 | Main +5V | Voltage | 5.15 | V | 'OK' 1504 | Main +3.3V | Voltage | 3.37 | V | 'OK' 1568 | Battery +3V | Voltage | 3.08 | V | 'OK' 1632 | AUX 1.8V | Voltage | 1.77 | V | 'OK' 1696 | AUX 1.2V | Voltage | 1.19 | V | 'OK' 1760 | LAN 1.2V | Voltage | 1.18 | V | 'OK' 1824 | Stdby +3.3V | Voltage | 3.32 | V | 'OK' 1888 | Mem1 +1.5V | Voltage | 1.52 | V | 'OK' 1952 | Mem1 +1.8V | Voltage | 1.83 | V | 'OK' 2016 | Mem2 +1.5V | Voltage | 1.53 | V | 'OK' 2080 | Mem2 +1.8V | Voltage | 1.84 | V | 'OK' 2144 | Core +1.5V | Voltage | 1.53 | V | 'OK' 2208 | 1.8V | Voltage | 1.80 | V | 'OK' 2272 | VTT BMC | Voltage | 0.89 | V | 'OK' 2336 | VRD1 | Current | 4.80 | A | 'OK' 2400 | VRD2 | Current | 3.20 | A | 'OK' 2464 | PS12V | Current | 15.36 | A | 'OK' 2528 | PS12V | Module/Board | 180.00 | W | 'OK' 2592 | PS5V | Current | 3.51 | A | 'OK' 2656 | PS5V | Module/Board | 17.50 | W | 'OK' 2720 | PS3V3 | Current | 5.60 | A | 'OK' 2784 | PS3V3 | Module/Board | 16.50 | W | 'OK' 2848 | Pwr Mon | Other Units Based Sensor | 244.00 | W | 'OK' 2912 | FAN CPU1 | Fan | 5160.00 | RPM | 'OK' 2976 | FAN CPU2 | Fan | 5100.00 | RPM | 'OK' 3040 | FAN1 SYS | Fan | 5040.00 | RPM | 'OK' 3104 | FAN2 SYS | Fan | 5160.00 | RPM | 'OK' 3168 | FAN3 SYS | Fan | 4860.00 | RPM | 'OK' 3232 | FAN4 SYS | Fan | 4920.00 | RPM | 'OK' 3296 | FAN1 SYS | Fan | N/A | RPM | N/A 3360 | FAN2 SYS | Fan | N/A | RPM | N/A 3424 | FAN PSU | Fan | N/A | RPM | N/A 3488 | FAN PSU1 | Fan | 4080.00 | RPM | 'OK' 3552 | FAN PSU2 | Fan | 4200.00 | RPM | 'OK' 3616 | I2C1 err | OEM Reserved | 0.00 | % | 'OK' 3680 | I2C2 err | OEM Reserved | 0.00 | % | 'OK' 3744 | I2C3 err | OEM Reserved | 0.00 | % | 'OK' 3808 | I2C4 err | OEM Reserved | 0.00 | % | 'OK' 3872 | I2C5 err | OEM Reserved | 0.00 | % | 'OK' 3936 | I2C6 err | OEM Reserved | 0.00 | % | 'OK' 4000 | SEL Level | Monitor ASIC/IC | 0.00 | % | 'OK' 4064 | CPU 1 | Processor | N/A | N/A | 'Processor Presence detected' 4112 | CPU 2 | Processor | N/A | N/A | 'Processor Presence detected' 4160 | Pwr Mon | Entity Presence | N/A | N/A | 'Entity Present' 4208 | PS12V | Entity Presence | N/A | N/A | 'Entity Present' 4256 | PS5V | Entity Presence | N/A | N/A | 'Entity Present' 4304 | PS3V3 | Entity Presence | N/A | N/A | 'Entity Present' 4352 | Pwr Level | Entity Presence | N/A | N/A | 'Entity Present' 4400 | Pwr Level | OEM Reserved | N/A | N/A | 'OEM Event = 0008h' 4448 | CPU detect | System Event | N/A | N/A | 'OK' 4496 | PSU | Entity Presence | N/A | N/A | 'Entity Absent' 4544 | PSU | Entity Presence | N/A | N/A | 'Entity Present' 4592 | PSU1 | Entity Presence | N/A | N/A | 'Entity Present' 4640 | PSU2 | Entity Presence | N/A | N/A | 'Entity Present' 4688 | PSU | Power Unit | N/A | N/A | 'Fully Redundant' 4736 | PSU | Power Unit | N/A | N/A | N/A 4784 | PSU | OEM Reserved | N/A | N/A | N/A 4832 | PSU1 | OEM Reserved | N/A | N/A | 'OEM Event = 0002h' 4880 | PSU2 | OEM Reserved | N/A | N/A | 'OEM Event = 0002h' 4928 | FAN CPU1 | Entity Presence | N/A | N/A | 'Entity Present' 4976 | FAN CPU2 | Entity Presence | N/A | N/A | 'Entity Present' 5024 | FAN1 SYS | Entity Presence | N/A | N/A | 'Entity Present' 5072 | FAN2 SYS | Entity Presence | N/A | N/A | 'Entity Present' 5120 | FAN3 SYS | Entity Presence | N/A | N/A | 'Entity Present' 5168 | FAN4 SYS | Entity Presence | N/A | N/A | 'Entity Present' 5216 | FAN1 SYS | Entity Presence | N/A | N/A | 'Entity Absent' 5264 | FAN2 SYS | Entity Presence | N/A | N/A | 'Entity Absent' 5312 | FAN PSU | Entity Presence | N/A | N/A | 'Entity Absent' 5360 | FAN PSU1 | Entity Presence | N/A | N/A | 'Entity Present' 5408 | FAN PSU2 | Entity Presence | N/A | N/A | 'Entity Present' 5456 | FAN CPU1 | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 5504 | FAN CPU2 | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 5552 | FAN1 SYS | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 5600 | FAN2 SYS | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 5648 | FAN3 SYS | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 5696 | FAN4 SYS | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 5744 | FAN1 SYS | OEM Reserved | N/A | N/A | N/A 5792 | FAN2 SYS | OEM Reserved | N/A | N/A | N/A 5840 | FAN PSU | OEM Reserved | N/A | N/A | N/A 5888 | FAN PSU1 | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 5936 | FAN PSU2 | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 5984 | DIMM-1A | OEM Reserved | N/A | N/A | 'OEM Event = 0002h' 6032 | DIMM-1A | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 6080 | DIMM-1B | OEM Reserved | N/A | N/A | 'OEM Event = 0002h' 6128 | DIMM-1B | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 6176 | DIMM-2A | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 6224 | DIMM-2A | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 6272 | DIMM-2B | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 6320 | DIMM-2B | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 6368 | DIMM-3A | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 6416 | DIMM-3A | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 6464 | DIMM-3B | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 6512 | DIMM-3B | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 6560 | DIMM-4A | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 6608 | DIMM-4A | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 6656 | DIMM-4B | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 6704 | DIMM-4B | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 6752 | DIMM-1C | OEM Reserved | N/A | N/A | 'OEM Event = 0002h' 6800 | DIMM-1C | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 6848 | DIMM-1D | OEM Reserved | N/A | N/A | 'OEM Event = 0002h' 6896 | DIMM-1D | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 6944 | DIMM-2C | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 6992 | DIMM-2C | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 7040 | DIMM-2D | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 7088 | DIMM-2D | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 7136 | DIMM-3C | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 7184 | DIMM-3C | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 7232 | DIMM-3D | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 7280 | DIMM-3D | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 7328 | DIMM-4C | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 7376 | DIMM-4C | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 7424 | DIMM-4D | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 7472 | DIMM-4D | OEM Reserved | N/A | N/A | 'OEM Event = 0001h' 7520 | Watchdog | Watchdog 2 | N/A | N/A | 'OK' 7568 | Housing open | Physical Security | N/A | N/A | 'OK' 7616 | iRMC request | OEM Reserved | N/A | N/A | 'OK' 7664 | I2C1 | OEM Reserved | N/A | N/A | 'OEM Event = 0002h' 7712 | I2C2 | OEM Reserved | N/A | N/A | 'OEM Event = 0002h' 7760 | I2C3 | OEM Reserved | N/A | N/A | 'OEM Event = 0002h' 7808 | I2C4 | OEM Reserved | N/A | N/A | 'OEM Event = 0002h' 7856 | I2C5 | OEM Reserved | N/A | N/A | 'OEM Event = 0002h' 7904 | I2C6 | OEM Reserved | N/A | N/A | 'OEM Event = 0002h' 9920 | System Mgmt SW | OEM Reserved | N/A | N/A | N/A 9968 | Local Monitor | Other Fru | N/A | N/A | 'Device Enabled' 10016 | Pwr Btn override | System ACPI Power State | N/A | N/A | 'OK' 10064 | NMI | Critical Interrupt | N/A | N/A | 'OK' 10160 | System BIOS | OEM Reserved | N/A | N/A | N/A 10208 | iRMC | OEM Reserved | N/A | N/A | N/A
[root@lx-server ~]# megacli -AdpAllInfo -aAll Adapter #0 ============================================================================== Versions ================ Product Name : RAID 5/6 SAS based on LSI MegaRAID Serial No : FW Package Build: 11.0.1-0051 Mfg. Data ================ Mfg. Date : 00/00/00 Rework Date : 00/00/00 Revision No : Battery FRU : N/A Image Versions in Flash: ================ FW Version : 1.40.352-2004 BIOS Version : 2.07.00 WebBIOS Version : 2.2-22-e_15-Rel Preboot CLI Version: 01.40-010:#%00008 Boot Block Version : 1.00.00.01-0012 Pending Images in Flash ================ None PCI Info ================ Controller Id : 0000 Vendor Id : 1000 Device Id : 0060 SubVendorId : 1734 SubDeviceId : 10f9 Host Interface : PCIE Link Speed : 0 Number of Frontend Port: 0 Device Interface : PCIE Number of Backend Port: 8 Port : Address 0 500000e116df6a92 1 500000e01e4b3492 2 7a89814ba0c8e9af 3 7a89814fb1daf7af 4 7573905a99c615b4 5 3b2a834d7c6a4c36 6 0000000000000000 7 0000000000000000 HW Configuration ================ SAS Address : 50030057009c2fa0 BBU : Present Alarm : Present NVRAM : Present Serial Debugger : Present Memory : Present Flash : Present Memory Size : 256MB TPM : Absent On board Expander: Absent Upgrade Key : Absent Temperature sensor for ROC : Absent Temperature sensor for controller : Absent Settings ================ Current Time : 14:59:18 10/15, 2017 Predictive Fail Poll Interval : 300sec Interrupt Throttle Active Count : 16 Interrupt Throttle Completion : 50us Rebuild Rate : 30% PR Rate : 20% BGI Rate : 30% Check Consistency Rate : 30% Reconstruction Rate : 30% Cache Flush Interval : 4s Max Drives to Spinup at One Time : 2 Delay Among Spinup Groups : 6s Physical Drive Coercion Mode : Disabled Cluster Mode : Disabled Alarm : Disabled Auto Rebuild : Enabled Battery Warning : Enabled Ecc Bucket Size : 15 Ecc Bucket Leak Rate : 1440 Minutes Restore HotSpare on Insertion : Enabled Expose Enclosure Devices : Disabled Maintain PD Fail History : Enabled Host Request Reordering : Enabled Auto Detect BackPlane Enabled : SGPIO/i2c SEP Load Balance Mode : Auto Use FDE Only : No Security Key Assigned : No Security Key Failed : No Security Key Not Backedup : No Default LD PowerSave Policy : Controller Defined Maximum number of direct attached drives to spin up in 1 min : 0 Auto Enhanced Import : No Any Offline VD Cache Preserved : No Allow Boot with Preserved Cache : No Disable Online Controller Reset : No PFK in NVRAM : No Use disk activity for locate : No POST delay : 1 seconds BIOS Error Handling : Stop On Errors Current Boot Mode :Normal Capabilities ================ RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span Supported Drives : SAS, SATA Allowed Mixing: Mix in Enclosure Allowed Status ================ ECC Bucket Count : 0 Limitations ================ Max Arms Per VD : 32 Max Spans Per VD : 8 Max Arrays : 128 Max Number of VDs : 64 Max Parallel Commands : 1008 Max SGE Count : 80 Max Data Transfer Size : 8192 sectors Max Strips PerIO : 42 Max LD per array : 16 Min Strip Size : 8 KB Max Strip Size : 1.0 MB Max Configurable CacheCade Size: 0 GB Current Size of CacheCade : 0 GB Current Size of FW Cache : 0 MB Device Present ================ Virtual Drives : 6 Degraded : 0 Offline : 0 Physical Devices : 7 Disks : 6 Critical Disks : 0 Failed Disks : 0 Supported Adapter Operations ================ Rebuild Rate : Yes CC Rate : Yes BGI Rate : Yes Reconstruct Rate : Yes Patrol Read Rate : Yes Alarm Control : Yes Cluster Support : No BBU : Yes Spanning : Yes Dedicated Hot Spare : Yes Revertible Hot Spares : Yes Foreign Config Import : Yes Self Diagnostic : Yes Allow Mixed Redundancy on Array : No Global Hot Spares : Yes Deny SCSI Passthrough : No Deny SMP Passthrough : No Deny STP Passthrough : No Support Security : No Snapshot Enabled : No Support the OCE without adding drives : No Support PFK : No Support PI : No Support Boot Time PFK Change : No Disable Online PFK Change : No Support Shield State : No Block SSD Write Disk Cache Change: No Supported VD Operations ================ Read Policy : Yes Write Policy : Yes IO Policy : Yes Access Policy : Yes Disk Cache Policy : Yes Reconstruction : Yes Deny Locate : No Deny CC : No Allow Ctrl Encryption: No Enable LDBBM : No Support Breakmirror : No Power Savings : No Supported PD Operations ================ Force Online : Yes Force Offline : Yes Force Rebuild : Yes Deny Force Failed : No Deny Force Good/Bad : No Deny Missing Replace : No Deny Clear : No Deny Locate : No Support Temperature : No Disable Copyback : No Enable JBOD : No Enable Copyback on SMART : No Enable Copyback to SSD on SMART Error : Yes Enable SSD Patrol Read : No PR Correct Unconfigured Areas : Yes Enable Spin Down of UnConfigured Drives : No Disable Spin Down of hot spares : No Spin Down time : 0 T10 Power State : No Error Counters ================ Memory Correctable Errors : 0 Memory Uncorrectable Errors : 0 Cluster Information ================ Cluster Permitted : No Cluster Active : No Default Settings ================ Phy Polarity : 0 Phy PolaritySplit : 0 Background Rate : 30 Strip Size : 64kB Flush Time : 4 seconds Write Policy : WT Read Policy : None Cache When BBU Bad : Disabled Cached IO : No SMART Mode : Mode 6 Alarm Disable : No Coercion Mode : None ZCR Config : Unknown Dirty LED Shows Drive Activity : No BIOS Continue on Error : 1 Spin Down Mode : None Allowed Device Type : SAS/SATA Mix Allow Mix in Enclosure : Yes Allow HDD SAS/SATA Mix in VD : No Allow SSD SAS/SATA Mix in VD : No Allow HDD/SSD Mix in VD : No Allow SATA in Cluster : No Max Chained Enclosures : 3 Disable Ctrl-R : Yes Enable Web BIOS : Yes Direct PD Mapping : No BIOS Enumerate VDs : Yes Restore Hot Spare on Insertion : Yes Expose Enclosure Devices : No Maintain PD Fail History : Yes Disable Puncturing : No Zero Based Enclosure Enumeration : No PreBoot CLI Enabled : Yes LED Show Drive Activity : Yes Cluster Disable : Yes SAS Disable : No Auto Detect BackPlane Enable : SGPIO/i2c SEP Use FDE Only : No Enable Led Header : No Delay during POST : 0 EnableCrashDump : No Disable Online Controller Reset : No EnableLDBBM : No Un-Certified Hard Disk Drives : Block Treat Single span R1E as R10 : No Max LD per array : 16 Power Saving option : All power saving options are enabled Default spin down time in minutes: 0 Enable JBOD : No Time taken to detect CME : 60s Exit Code: 0x00
[root@lx-server ~]# megacli -LDInfo -L0 -a0 Adapter 0 -- Virtual Drive Information: Virtual Drive: 0 (Target Id: 0) Name : RAID Level : Primary-0, Secondary-0, RAID Level Qualifier-0 Size : 136.218 GB Sector Size : 512 Parity Size : 0 State : Optimal Strip Size : 64 KB Number Of Drives : 1 Span Depth : 1 Default Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU Default Access Policy: Read/Write Current Access Policy: Read/Write Disk Cache Policy : Enabled Encryption Type : None Is VD Cached: No Exit Code: 0x00
[root@lx-server ~]# ipmitool lan print 2 Set in Progress : Set Complete Auth Type Support : NONE MD5 PASSWORD Auth Type Enable : Callback : NONE MD5 PASSWORD : User : NONE MD5 PASSWORD : Operator : NONE MD5 PASSWORD : Admin : NONE MD5 PASSWORD : OEM : NONE MD5 PASSWORD IP Address Source : Static Address IP Address : 10.1.1.100 Subnet Mask : 255.0.0.0 MAC Address : 00:19:99:59:96:80 SNMP Community String : public IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10 BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Disabled Gratituous ARP Intrvl : 2.0 seconds Default Gateway IP : 0.0.0.0 802.1q VLAN ID : Disabled 802.1q VLAN Priority : 0 RMCP+ Cipher Suites : 0,1,2,3,6,7,8,17 Cipher Suite Priv Max : OOOOOOOOXXXXXXX : X=Cipher Suite Unused : c=CALLBACK : u=USER : o=OPERATOR : a=ADMIN : O=OEM Bad Password Threshold : Not Available